Simple Production Calculator Minimize

Pump Stroke Length: in.
Strokes / Minute: SPM
Plunger Size:
Efficiency: %

bbl/day m3/day 
 
 

Load: 0.06s   Print   

 Simple Depth Calculation Minimize
Determine the approximate Vertical Depth based on measured depth.
Simple Calculation
This is a very inaccurate calculation. This makes the assumption of a straight line well bore between surface and pump, calculating a simple ratio for the target vertical depth. This is only provided for quick estimates and should not, under any circumstances, be used for anything important. Please use the form to the right to calculate a more accurate value based on the well bore deviation survey.

VD = (MD * PumpTVD) / PumpMD
(VD & MD are the target depths)
 Well Diagram
Pump Vertical Depth: ft.
Pump Measured Depth: ft.
Target Measured Depth: ft.

Calculate

From Well Bore Profile
This is a more accurate calculation, based on the saved well deviation profile. This is still an estimate, but is far more accurate than the simple calculation to the left.

If your well does not show up in this list, you can add the well bore deviation data here

Please Login to use this calculator




Load: 0.03s   Print   

 Simple Gravity Calculation Minimize
APISG
Specific Gravity Conversions:
API = (141.5 / SG) - 131.5
SG = 141.5 / (131.5 + API)

Load: 0.02s   Print   

Page generated in 0.18sCopyright 2006-2014 WANSCO, LLC  •  Privacy Statement  •  Terms Of Use